Written format have to be in an REPORT FORMAT please!
This is an assignment -Report -for the module Entrepreneurship in the Global Marketplace so please assign someone who is specialised in this field-Entrepreneurship-
ASSESSMENT
The International Business Plan Assignment
A foreign country (outside the UK) should be selected for this assignment. It should be written in a designated structure as follows:
-Executive summary
-Business/opportunity proposition in the selected foreign country
-Analysis of foreign country business environment
-Market research and data presentation
-Entry strategy and operation of the proposed business venture in the foreign country
-Financial plan
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Acme International has a small manufacturing shop that includes two welding stations and a separate paint room. Two welders produce small components for automobiles using stainless steel and MIG welding. After grinding has been performed in the welding bays, the parts are painted in the paint room. The only ventilation present is a ceiling fan in each room that is used for general dilution ventilation.
Note: Because of specifications from their client, substitution is not a viable control method for either the welding or painting operations.
An industrial hygienist (IH) recently conducted air monitoring at the facility. In the welding bays, the IH conducted initial monitoring with a personal sample collected on each welder and analyzed for hexavalent chromium (Cr+6). The results showed that time weighted average (TWA) exposures were 6.2 micrograms per cubic meter (μg/m3) and 6.6 μg/m3. The OSHA TWA PEL is 5 μg/m3 with an action level of 2.5 μg/m3. MOS 5201, Safety Engineering 3
The paint area uses primer and paint containing benzene, ethyl benzene, toluene, and xylene. Workers in the area also use acetone on rags to clean surfaces. One employee was sampled for the entire work shift. A second employee was sampled for 15 minutes (STEL sample) while cleaning with the acetone and for 15 minutes (STEL sample) while mixing the primer and paint. The table below summarizes the results of the sampling, along with the applicable permissible exposure limits (PELs) established by OSHA and the guidelines (threshold limit values or TLVs) published by the American Conference of Governmental Industrial Hygienists (AGGIH). Please see the table with info on benzene, ethyle benzene, toulene, xylene and acetone uploaded.
II. You have been hired by Acme International to evaluate the work areas, recommend controls, design the controls, and install the controls.
III. Assignment
1.) Analyze the hazards in both areas of the facility using one of the methods described in Chapter 3 of the textbook. You should identify at least two hazards in each area (welding and painting).
2.) Perform a risk assessment on at least two hazards in each area using the 4X4 matrix in Table 17-3 of the textbook.
3.) Prioritize the need for controls for the hazards you selected based on the results of the risk assessment.
4).) Using the hierarchy of engineering controls listed on page 420 of the textbook, recommend a control method for each hazard that you believe would be the most effective in reducing risk to an acceptable level. Use the 4X4 matrix to show the reduction in risk for each hazard. Note: At least one control method must be a local exhaust ventilation (LEV) system.
5.) For the LEV, specify the hood configuration, a recommended capture velocity, and a recommendation for treatment of the exhaust stream. Explain why you made the choices and support your decisions with at least one reference other than the text.
6.) Discuss how Prevention through Design could be used to reduce the risks associated with these operations if you were hired to design a new facility performing these same activities from scratch.
Prepare paper in a properly formatted APA document, including a title page, a brief abstract section, the body of the paper, and a reference page. The body of the paper must be a minimum of four pages in length and double-spaced. Use the uploaded information from the ‘Safety Engineering’ textbook and at least one other source.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Students are required to prepare a marketing plan for Begawan Solo. http://www.bengawansolo.com.sg
The length of the e-marketing plan should not be more than 10 pages (12 font; 1 inch margin in all side) excluding the cover page, table of contents, references and appendices. Your write up beyond the first 10 pages will NOT be marked.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Locate a minimum of 15 peer-reviewed articles that describe the problem or issue and that support the proposed solution. Eight of the 15 articles must be research-based (e.g., a study which is qualitative, quantitative, descriptive, or longitudinal).
Hint: Begin your search for literature by utilizing the databases located in the GCU Library. Contact your faculty member, the librarian, or library staff for additional researching tips and key word suggestions.
Preview each of the 15 articles chosen by reading the article abstracts and summaries.
Hint: Article abstracts and summaries provide a concise description of the topic, research outcomes, and significance of findings.
Hints : central line blood stream infection in dialysis patients
Perform a rapid appraisal of each article by answering the following questions (one to two sentences are sufficient to answer each question):
1.How does each article describe the nature of the problem, issue, or deficit you have identified?
2.Does each article provide statistical information to demonstrate the gravity of the issue, problem, or deficit?
3.What are example(s) of morbidity, mortality, and rate of incidence or rate of occurrence in the general population?
4.Does each article support your proposed change?
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
1. Read “Self Disclosure” in the Comm 2 Course Workbook pp. 16-19.
2. Select a partner and complete the interview exercise on pp. 19-20.
3. For the writing assignment, apply the interview you had with your partner to the levels of self-disclosure. Recall and describe the quality of communication you had with your interview partner. How did you feel before, during, and after the interview? At which levels of self disclosure would you put the communication you had with your partner? Do these levels of self disclosure reveal the quality of relationship you have with this person? Share your thoughts, feelings, insights, and analysis.
In your writing, relate your experience to at least three of the five levels of self-disclosure. Underline or bold the levels for clarity. For example:
“When the interview began, my partner and I communicated at Level #5 Cliché Communication, where we joked about the interview because we both felt a little nervous. However, when I started answering the first question by letting my partner know how I would like to be valued and appreciated, the conversation quickly shifted to Level #2 Personal Feelings….”
This paper involves your sharing of some personal information. For the purpose of gaining maximum value from this assignment, please write as openly and honestly as you can. After you do so, if there are portions of your writing that you would rather keep private, feel free to edit those out of the final version that you submit to me. My interest in this assignment is not so much what was said by you or your partner during the interview, but rather in your ability to clearly relate the quality of the interview to levels of self disclosure presented in the workbook. You don’t have to tell me specifically whom you interviewed unless you want to. Referring the person as your “interview partner” will be fine. This is a writing assignment only and you will not present it in class.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Description: You will be provided with a quantitative research article to critique. The critique will involve the identification of the strengths and limitations in the design of the study based upon the principles and assumptions of good research design consistent with realising the article’s stated research purpose(s) from a quantitative perspective. On this basis individuals will then develop an alternative research design consistent with realising the research purpose(s), again based on upon the principles of good research design, from a quantitative perspective. Opportunities to practice article critique and designing quantitative research based upon the principles of good research design will be provided in class. Conceptual material to support research design decisions is provided on Blackboard. Note that this assessment does not involve data collection.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Strategic Audit Part One
my company: Tootsie Roll Industries
Industry: Candy and other confectionery products
Guidelines for Preparing Part 1 and Part 2 of the Company Strategic Audit
Each part of the audit should be a professional report consisting of 3-4 single-spaced pages excluding figures, charts, references.
Bear in mind that this is a writing enhanced course. You will need to first submit your paper through the Bb Assignment link to an English professor who will grade your spelling and grammar. You can lose up to 10 points for writing mistakes. You will also submit your paper through the Strategic Audit link to Turnitin. Your paper will be checked for plagiarism when you make this submission; it must have less than 20% similarity score. (You can find out what your similarity score is by submitting your rough draft through the Strategic Audit link. I suggest you submit early enough to revise your paper if your score comes in over 20). I will grade your paper for the quality of your analysis. If you carefully follow the following guidelines, you will have a high quality analysis.
Below I have indicated the relevant chapters in your etextbook and provided you with websites that might be useful. If they don’t work, Google the topic to find other sites. Monitor my announcements throughout the semester for references to other helpful information.
Part 1 of the Strategic Audit
Describe your company’s current situation (Chapters 1, 2)
1.Briefly describe your company: its structure, products. What is the main industry that the company operates in? Provide the SIC or NAICS code. http://www.youtube.com/watch?v=EhDB391E944 Disregard the ReferenceUSA database; just listen to the part which describes SIC and NAICS codes.
2.Present a strategic vision statement and mission statement for your company as well as financial and strategic objectives? If what you find needs improvement, you may need to rewrite the vision and mission to better fit the definitions in your textbook)
Vision and mission http://www.youtube.com/watch?v=b2MyaR0gMo0&feature=related
3.List all the types of strategies your company is using. Be sure to explain what competitive strategy your company is using. What hard evidence can you cite that indicates your company’s strategies are working fairly well (or perhaps not working so well, if your company’s performance is lagging that of rival companies)? (Use Chapters 5)
4.Describe the business model being used by your company. (Be sure to identify both the customer value proposition and the profit proposition.) http://www.youtube.com/watch?v=hozC9lM4ltA&feature=related http://i360insight.com/2011/06/20/reinventing-your-value-proposition-with-business-model-innovation
5.Evaluate your company’s ethics and social responsibility. (use Chapter 9 as your guide)
Evaluate your company’s external environment (Refer to Chapter 3)
6.Discuss each of the five forces affecting the intensity of rivalry in the industry in which your company is competing. Describe each of them, e.g. who are the suppliers, what are the substitutes, etc.? For each factor, evaluate the competitive pressure as fierce, very strong, strong, moderate, or relatively weak. Then tell us why you made that evaluation.
7.What are the driving forces in the industry in which your company is competing? What impact will these driving forces have? Will they cause competition to be more or less intense? Will they act to boost or squeeze profit margins? List at least two actions your company should consider taking in order to combat any negative impacts of the driving forces.
· http://www.globalfuture.com/planning7.htm
8.How are the industry rivals positioned? What is the relative market share of each of the major rivals? Draw a strategic group map showing the positions of the companies in your industry. Which companies do you believe are in the most attractive position on the map? Which companies are the most weakly positioned? Which companies do you believe are likely to try to move to a different position on the strategic group map?
9.What do you see as the key factors for being a successful competitor in the industry? List at least three.
Discuss why or why not the industry offers good prospects for attractive profits?
Point distribution
Part 1: 100 points, 20% of final grade; Part 2: 100 points, 20% of final grade
Points attributed to each section: 8 pts. for sections 1,2,3,4,5,7,9,11,12,
22 pts. for sections 6,8,10,13,14 and 18 pts. for section 15.
You cannot gain points for having references or using correct grammar, spelling, and complete sentences. However, You can lose up to 10 points for not producing a professional paper. The SHSU Writing Center can help you. If you plagiarize, you are likely to fail…so be sure to submit your paper early enough so you can rewrite it if it has a similarity score higher than 20%.
This is the end of Part 1 of the Strategic Audit (First, Submit Part 1 through the Bb Assignment link. Later you will need to submit Part 1 through the Strategic Audit Part 1 link. Click on the Strategic Audit link in the Menu. Click on the Strategic Audit link on the next screen. From the Table of Contents select “Click here to turn it in” and then click “View /Complete”
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Using American Rhetoric (www.americanrhetoric.com) as your resource, listen to (or read and/or watch) one speech and write a 500 word essay evaluating the strengths AND weaknesses based on your knowledge of 1) verbal and/or nonverbal communication and 2) forms of support.
Rubric:
1 pt. for each of the following (Cut and paste this rubric at the bottom of your essay.):
_____1. A 500 word analysis of the speech that identifies the strengths and weaknesses
related to the verbal and nonverbal aspects of your selected speech.
_____2. Three reference to our text, on-line readings and/or lecture that support your
claims of the strengths and weaknesses of the speech.
_____3. At least two excerpts from the speech to illustrate what you consider to be the
a strength and/or weakness.
_____4. APA in-text citation and a reference page.
_____5. An error free essay (spelling and punctuation).
Our book is : Judy C. Pearson, J, Nelson, P., Titsworth, S. & Harter, L. Human Communication. Edition: 5th ed., [Rev. ed.]. Publisher: New York: McGraw-Hill. 2013. [ISBN: 9780078036873].
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
The word count for the essay is 1000 words
YOU ARE WORKING IN HOUSING DEPARTMENT
The title of the essay is:
‘To improve your housing services, you need to involve residents in decision making’. Discuss’
Marking criteria for essay
Excellent writing skills are shown. The essay sets out the advantages of resident participation and potential barriers to participation very well. This is supported by an excellent range of good practice examples, which are well integrated into the argument. The line of argument is compelling and excellent recent evidence provided. Excellent consideration of issues of diversity. Very accurate referencing and an excellent range of references
please, see the lecture about the people involvement in decision making in the attachment and some more back ground material. writer can use any literature to support any moral or ethical consideration.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
Discussion
Describe your results by noting any changes you might have observed in your performance across the 12 trials (e.g., improvement) for each hand and by comparing your performance between your two hands. Note also whether or not the amount of time for a trial changed with practice or whether it differed between hands. Discuss how your results illustrated closed-loop control as described in chapter 4. Describe any aspects of the task that you think might not have been controlled in a closed-loop mode. Discuss two factors other than those controlled in this lab that might have influenced your results.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
