Read each of the articles carefully. You are assigned (see below your name–next to the article) one article/PE approach); as a group be prepared to lead a conversation about the article. Please prepare, as a group, a maximum of a two-page summary of your assigned article to distribute in class (bring 19 copies). Highlight the strengths and limitations of your PE approach. You can also use The Program Evaluation Standards: Summary of the Standards as a way of framing the discussion.
The Program Evaluation Standards
Summary of the Standards
Utility Standards
The utility standards are intended to ensure that an evaluation will serve the information needs of intended users.
U1 Stakeholder Identification–Persons involved in or affected by the evaluation should be identified, so that their needs can be addressed.
U2 Evaluator Credibility–The persons conducting the evaluation should be both trustworthy and competent to perform the evaluation, so that the evaluation findings achieve maximum credibility and acceptance.
U3 Information Scope and Selection–Information collected should be broadly selected to address pertinent questions about the program and be responsive to the needs and interests of clients and other specified stakeholders.
U4 Values Identification–The perspectives, procedures, and rationale used to interpret the findings should be carefully described, so that the bases for value judgments are clear.
U5 Report Clarity–Evaluation reports should clearly describe the program being evaluated, including its context, and the purposes, procedures, and findings of the evaluation, so that essential information is provided and easily understood.
U6 Report Timeliness and Dissemination–Significant interim findings and evaluation reports should be disseminated to intended users, so that they can be used in a timely fashion.
U7 Evaluation Impact–Evaluations should be planned, conducted, and reported in ways that encourage follow-through by stakeholders, so that the likelihood that the evaluation will be used is increased.
Feasibility Standards
The feasibility standards are intended to ensure that an evaluation will be realistic, prudent, diplomatic, and frugal.
F1 Practical Procedures–The evaluation procedures should be practical, to keep disruption to a minimum while needed information is obtained.
Program Evaluation Standards
http://www.eval.org/EvaluationDocuments/progeval.html (2 of 4)3/1/2006 3:12:45 PM
?F2 Political Viability–The evaluation should be planned and conducted with anticipation of the different positions of various interest groups, so that their cooperation may be obtained, and so that possible attempts by any of these groups to curtail evaluation operations or to bias or misapply the results can be averted or counteracted.
F3 Cost Effectiveness–The evaluation should be efficient and produce information of sufficient value, so that the resources expended can be justified.
Propriety Standards
The propriety standards are intended to ensure that an evaluation will be conducted legally, ethically, and with due regard for the welfare of those involved in the evaluation, as well as those affected by its results.
P1 Service Orientation–Evaluations should be designed to assist organizations to address and effectively serve the needs of the full range of targeted participants.
P2 Formal Agreements–Obligations of the formal parties to an evaluation (what is to be done, how, by whom, when) should be agreed to in writing, so that these parties are obligated to adhere to all conditions of the agreement or formally to renegotiate it.
P3 Rights of Human Subjects–Evaluations should be designed and conducted to respect and protect the rights and welfare of human subjects.
P4 Human Interactions–Evaluators should respect human dignity and worth in their interactions with other persons associated with an evaluation, so that participants are not threatened or harmed.
P5 Complete and Fair Assessment–The evaluation should be complete and fair in its examination and recording of strengths and weaknesses of the program being evaluated, so that strengths can be built upon and problem areas addressed.
P6 Disclosure of Findings–The formal parties to an evaluation should ensure that the full set of evaluation findings along with pertinent limitations are made accessible to the persons affected by the evaluation, and any others with expressed legal rights to receive the results.
P7 Conflict of Interest–Conflict of interest should be dealt with openly and honestly, so that it does not compromise the evaluation processes and results.
P8 Fiscal Responsibility–The evaluator’s allocation and expenditure of resources should reflect sound accountability procedures and otherwise be prudent and ethically responsible, so that expenditu res are accounted for and appropriate.
Program Evaluation Standards
http://www.eval.org/EvaluationDocuments/progeval.html (3 of 4)3/1/2006 3:12:45 PM
?Accuracy Standards
The accuracy standards are intended to ensure that an evaluation will reveal and convey technically adequate information about the features that determine worth or merit of the program being evaluated.
A1 Program Documentation–The program being evaluated should be described and documented clearly and accurately, so that the program is clearly identified.
A2 Context Analysis–The context in which the program exists should be examined in enough detail, so that its likely influences on the program can be identified.
A3 Described Purposes and Procedures–The purposes and procedures of the evaluation should be monitored and described in enough detail, so that they can be identified and assessed.
A4 Defensible Information Sources–The sources of information used in a program evaluation should be described in enough detail, so that the adequacy of the information can be assessed.
A5 Valid Information–The information gathering procedures should be chosen or developed and then implemented so that they will assure that the interpretation arrived at is valid for the intended use.
A6 Reliable Information–The information gathering procedures should be chosen or developed and then implemented so that they will assure that the information obtained is sufficiently reliable for the intended use.
A7 Systematic Information–The information collected, processed, and reported in an evaluation should be systematically reviewed and any errors found should be corrected.
A8 Analysis of Quantitative Information–Quantitative information in an evaluation should be appropriately and systematically analyzed so that evaluation questions are effectively answered.
A9 Analysis of Qualitative Information–Qualitative information in an evaluation should be appropriately and systematically analyzed so that evaluation questions are effectively answered.
A10 Justified Conclusions–The conclusions reached in an evaluation should be explicitly justified, so that stakeholders can assess them.
A11 Impartial Reporting–Reporting procedures should guard against distortion caused by personal feelings and biases of any party to the evaluation, so that evaluation reports fairly reflect the evaluation findings.
A12 Metaevaluation–The evaluation itself should be formatively and summatively evaluated against these and other pertinent standards, so that its conduct is appropriately guided and, on completion,
Program Evaluation Standards
http://www.eval.org/EvaluationDocuments/progeval.html (4 of 4)3/1/2006 3:12:45 PM
stakeholders can closely examine its strengths and weaknesses.
?
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]
