Lab 04 Directions.

Lab 04 Directions

This lab requires you to use C++ class composition to implement a single pole-filter design program. The program will allow the user to specify resistor and capacitor values and filter type. Once all the user parameters are specified, the program will return the cutoff frequency values for the filter.
Composition may be thought of as a has-a relationship for objects, as compared to inheritance, which may be described as an is-a relationship for objects.
You are required to use two component classes: one for a resistor object and one for a capacitor object. You are then to define and implement a filter class that will contain one object of each the resistor and the capacitor classes in order to create the filter and its characteristics.
The Resistor class created in the Week 2 iLab may be used both as the class definition for the resistor object and as a template or a guide for the capacitor-class definition.
The lab also requires you to implement your program in a multiple-file project and create both cpp and h files for each class defined. In addition, the program will have the capacity to save all filter parameters to a text file and read previously designed filter parameters from a text file.

STEP 1: Create a Multifile Project for the Composition Lab

1. Add three classes to the project: a Filter class, a Capacitor class, and a Resistor class.
2. You may use the Resistor class files from the Week 2 lab for this lab.
3. The Capacitor class should be modeled after the Resistor class for class members and operation.
STEP 2: Filter-Class Definition

The Filter class should have, at a minimum, the following capabilities.
a resistor-object data member
a capacitor-object data member
a cutoff frequency (in Hertz) of the RC filter
maximum and minimum cutoff frequencies, based on the maximum and minimum in-tolerance values of the capacitor and the resistor object
a filter type, either low pass or high pass
allow the user to enter new values for the filter, including
6.1. resistor tolerance and nominal resistance;
6.2. capacitor tolerance and nominal capacitance; and
6.3. filter type
provides the ability to write all capacitor, resistor, and filter data members to a formatted text file and allows the user to name the file
provides the ability to read all capacitor, resistor, and filter data members from a formatted text file and allows the user to enter the file name and correctly handles a file-not-found error
STEP 3: Test-Program Operation

All data-input and data-display operations (cin and cout) should be done in the function main() test program.
The test program should instantiate at least one object of the class Filter.
The user should enter values for all the data members of the Filter, Resistor, and Capacitor classes.
The Filter class should then calculate and display the correct maximum and minimum cutoff frequencies.
The test program should then display all Filter, Resistor, and Capacitor data members.

COMP/220A COMP220A COMP-220A COMP220 A COMP 220 A
COMP/220B COMP220B COMP-220B COMP220 B COMP 220 B
COMP/220C COMP220C COMP-220C COMP220 C COMP 220 C
COMP/220D COMP220D COMP-220D COMP220 D COMP 220 D
Lab4 Lab 4 Week 4 Week4 Week4 Lab iLab4 of 7

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]