Category: Essays

In this project you are asked to develop a model, then provide an analysis, and a report of a business situation. It will require application of the techniques discussed in textbook (see below) to a specific problem area involving either finance, economy, marketing, personnel, production, or some other problem of your choosing. Write on the following areas : i) Conducting Investment Appraisal and ii) Effective Decision-Making Under Conditions of Uncertainty Project paper should constitute 8 typed pages (minimum), based on 1 inch margins and 1.5 line spacing (half way between single and double spacing!) Project should follow APA format and page number guidelines. [the paper should constitute no less than 9 pages] 1.Title Page. 2. Executive Summary: A description of the project or case. 3. Scenario: A description of the decision making environment. Include political, social, legal, and other non-quantifiable factors that have a bearing on the managerial situation. 4. Problem: A discussion of the specific problem addressed in the project or case. 5. Model(s): A description of the management science and/or decision theory model (or models) used to address the problem, and the data obtained. 6. Solution to the model: Report on the results obtained from the optimization or other management science models (including sensitivity or “post-optimality” analysis). 7. Recommended solutions: A discussion of managerial options for solving the problem, taking into account exogenous considerations not explicitly accounted for in the mathematical model. 8. Bibliography: An alphabetical listing of references consulted. 9. Appendices: Supporting materials such as computer print-outs, data used in preparing the model(s), calculations, etc. ======== TEXTBOOK TO BE CONSULTED ======== Book Title: Essential Quantitative Methods: For Business, Management, and Finance Author(s): Les Oakshott ; Edition: 5/E Year: 2013 Publisher: Palgrave Macmillan ISBN: 9780230302662

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

You have to watch the movie The Manchurian Candidate (1962). Make sure it is the original movie not the remake. Then you have to do the following 5 components in an essay format:

1) an introduction that provides an overview of your paper for the reader.

2) a brief description of the film’s plot (no more than 250 words).

3) brief biographical sketches of at least three of the principal persons involved in the making or production of the film. Depending on the film you select, these may include the film director, the screenwriter, several of the performers, the cinematographer, the music composer, or others. If appropriate, describe the significance of the film in the context of that person’s career. For a guide to biographical reference books, click on Biographical Sources on Film.

4) a description and critical evaluation of three reviews that were written at the time the film was first released. In selecting the three reviews, aim for some balance and variety in your sources (i.e., look for different types of publications with different points of view, if possible–for instance, it is better if not all three reviews come from daily newspapers). Do not simply summarize the content of each review; rather try to analyze and assess the author’s perspective. The instructor may be able to assist you in locating reviews, if necessary. Please be sure to provide complete bibliographic citations of your reviews, including electronic versions if applicable. For more information on finding reviews, click on Finding Reviews of 1960s Films.

5) your own assessment of the film in relation to its cultural and/or historical context. Based on what you know about the 1960s (and what you have read in the course textbooks), do you think the film is a representative artifact of its time and culture? Why or why not?

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

Please complete the following and provide recommendation for an individual suffering from adult acute asthma. The assumptions being made in this case study is for an adult woman with acute asthma and acute allergic rhinitis seeking a reasonable accommodation to work from home several days a week.

Describe which activities (both on and off the job) the medical condition limits and the extend to which the condition limits the ability to perform these activities.

Considering your medical condition/impairment, make a clinical assessment of the injury, hazard, risk, or other consequence to your patient or others that would arise if s/he were to work without the requested accommodation or work change.

If a work change or accommodation is needed please specify what change or accommodation is needed and substantiate why? (ie how will this accommodation or work change all your patient to fulfill work requirements safely – without harm to himself or other?

Please estimate the duration (or frequency this work place accommodation will be needed? If the work change will be for a limited time, when and how will you reassess patient?

If the work change or accommodation you specify is obtained by your patient, what (if any) other medical limitation would preclude your patient from being able to perform the attached work requirements?

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

Recently it was announced that two major hospital systems would be merging their services in to one entity. Both are comprised of multiple hospital units and specialty clinics. While on the surface, this has been touted as an economical move with substantial savings to both parties and the potential to solidify their market share, there are as yet many barriers to overcome.

For instance, one system has its roots as a Catholic entity, while the other began with its origins as a Jewish facility.

The medical staff is divided on whether the merger is good for patients and their practices. Both groups of employees are understandably unsettled as it is uncertain who of the senior administrative staff will remain. The organizational culture of both institutions is also of major concern.

Given these circumstances, what form or model(s) of leadership would you bring to bear? Describe in detail the steps you would take to redirect the mission and vision of this new emerging entity.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

Research the people management practices of PepsiCo.

Write a 5-7 page paper in which you:

Describe the company’s overall people management strategy
Discuss its approach to employee rewards and motivation
Evaluate the company’s culture (which aspects do you find most appealing, and which concern you?)
Analyze the company’s ability to attract and retain employees (what competitive advantages does the company have, and what are its greatest disadvantages?)
Make recommendations for strengthening the company’s workforce strategy (what would you do differently, how would you do it, and why?

NOTE PLEASE DISCUSS EACH POINT SEPARATELY AND INCLUDE A INTRODUCTION.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

Discussions – in two parts:

This week focuses on learning from an individual perspective and how an individual’s learning experience interacts within the organisational learning framework. Starting with yourself, you can begin to see the relationship between the individual learner and his or her own learning process within an organisation.

PART 1:
To prepare for the first discussion, review the resources developing Kolb’s experiential learning theory, cognitivism, and the contrasting social constructivist theory. In addition, think again about the notion of the learning organisation in relation to your own working context.

With these thoughts in mind, in a 500- to 750-word response, post your answers to the following to the Discussion Board:

• What forms of learning have you experienced in your working life? What learning sources do you consult when you need to know about something? Do you think of this as a form of learning?

Remember to cite and reference examples from the readings and journal articles for this week, add at least three of your own research – in sum 7 expected. Harvard Style.

PART 2:

To prepare for the second discussion, read the article by Ladkin et al. (2009). Reflect on your learning experience so far specifically as an online learner.
In a 500- to 750-word reflection, post your thoughts on the following to the Discussion Board:

• On the basis of the learning styles referred to in Reynolds (1997), discuss whether ‘learning in cyberspace’ is a more individual process than ‘traditional’ learning in a lecture theatre or classroom. Make reference to the reading by Donna Ladkin and her colleagues.

Remember to cite and reference examples from the readings and journal articles for this week, add at least two of your own research – in sum 7 expected. Harvard Style.

Keep in mind: Both parts have to be separate → two discussions!

Articles also given and uploaded.

Currently 1 writers are viewing this order
Request order
Request deadline extension till
Choose your reason
Date
14/08/2014
…
Time
12

52

© 2005–2014 “EssayWriters.net” Privacy policy info@essaywriters.net

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

University of Central Lancashire
School of Computing, Engineering and Physical Sciences
Page 1 of 9
EL1205 Engine EL1205 EngineEL1205 EngineEL1205 EngineEL1205 Engine EL1205 EngineEL1205 EngineEL1205 EngineEL1205 Engineering Practice Referral Coursework, 20 , 20, 2014
Design & build I: Design & build I: Design & build I: Design & build I: Design & build I: Design & build I: Design & build I: Design & build I: Design & build I: RS232 Character GeneratorRS232 Character Generator RS232 Character GeneratorRS232 Character GeneratorRS232 Character Generator RS232 Character Generator RS232 Character Generator RS232 Character Generator RS232 Character Generator RS232 Character Generator RS232 Character Generator RS232 Character GeneratorRS232 Character GeneratorRS232 Character Generator
W. Quan and Stephen Mein
July 2014
1 Aim
This assignment is designed to assess your ability to use basic electronic engineering practice skills in a design and build exercise. It contributes to the following EL1205 module learning outcomes:
1 Identify, select and describe electronic components and their characteristics.
2 Use standard electronic laboratory equipment.
3 Use Electronic Computer-Aided Design (ECAD) tools.
4 Construct simple electronic circuits using appropriate prototyping techniques.
5 Undertake a small electronic design project under guidance.
2 Publication datePublication datePublication datePublication date Publication datePublication date Publication date Publication date Publication date Publication date
This brief was published in July 2014.
3 Submission arrangementsSubmission arrangementsSubmission arrangementsSubmission arrangementsSubmission arrangements Submission arrangements Submission arrangements Submission arrangementsSubmission arrangements Submission arrangements Submission arrangementsSubmission arrangementsSubmission arrangementsSubmission arrangements
Your demonstration of the circuit board will need to be made at 10am on Friday, 15 August 2014. Your report will need to be submitted to eLearn by 4pm on Friday, 15 August.
4 BackgroundBackground BackgroundBackground Background BackgroundBackground
One of the oldest communications protocol is RS232, or ��serial’. Up until recently, all PCs had a 9-pin ��D-type’ serial port for connecting serial devices like a mouse. RS232 was used on the old ��teletype’ terminals as a means of communicating with a host computer. Embedded systems use serial communications to exchange data with other embedded systems or ��host’ computers.
An RS232 frame can be composed of a group of 10 bits, clocked out by a 555 timer-based ��baud rate’ generator. The bits in this frame can be set low or high by an ��RDL’ (resistor-diode logic) OR gate. These 5V logic signals can be converted to the correct RS232 voltage levels by a ��MAX232’ chip.
A simple RS232 character generator can be made from a 555, a CMOS 4017 decade Johnson Counter (sometimes called a Ring Counter) and a set of diodes+resistor.
A specification for your particular system is given in Appendix A. You must design and construct a character generator to meet the specification. You must also simulate and measure its performance, and deliver your device and a report for assessment.
In addition to the specification at Appendix A, you should refer to the following documentation:
1. LM555 Timer data sheet. See http://www.national.com/ds/LM/LM555.pdf
2. 4017 data sheet: http://w3.id.tue.nl/fileadmin/id/objects/E-Atelier/doc/Datasheets/40XX/hef4017b.pdf 5 TaskTask
You need to do the following things:
1. Design a circuit to meet the attached specification.
2. Illustrate your circuit design using a schematic diagram created in ISIS.
3. Simulate your circuit design from ISIS using Proteus VSM, to confirm correct operation.
4. Create a PCB layout for your circuit using ARES, and have the PCB made for you by the electronics technicians.
5. Construct your circuit on PCB, using components available from electronics stores.
6. Test your circuit in the laboratory, making appropriate measurements on an oscilloscope and then a PC to demonstrate that the specification has been met.
7. Document your results in a report, and submit your report and your circuit as described at section 3, above.
6 Reporting ReportingReporting Reporting
Your report must have the following contents:
1. A circuit design description including references to source material and incorporating design calculations where required and a schematic diagram generated from ISIS.
2. Simulation results, generated using Proteus VSM from ISIS, confirming that the design should meet the specification.
3. A PCB layout for the circuit, generated from ARES.
4. A description of the testing undertaken to show that the circuit meets the specification, matching (within component value and measurement uncertainties) design calculations and simulation results.
Clarity of expression in written work is very important – in your studies as in professional life. Structure your report according to the specified documentation requirements. Make sure that your report is complete, but avoid unnecessary material. You must strike a balance between comprehensiveness and conciseness. Take care to check your spelling and, grammar.
The manner in which you present your submission is also very important. Your report must be word-processed and presented neatly. Ensure that the pages are securely bound, but not so securely that they can’t easily be removed for photocopying (copies of a representative sample of your reports will be retained for quality assurance purposes). Use a “Duraclip” or similar binder. Make sure that each page is marked with your name, the date of completion, the page number, and the total number of pages submitted. Make sure that the front page of your report has this information displayed prominently along with the module name and number and assignment title. Submit your report, your circuit and a completed Assignment Submission Form together in a transparent Snopake “PolyFile” or similar document wallet.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

Talking about the leak of study in sustainable office buildings. And why government didn’t take the response to encourage expert to find good energy saving by improve sustainability idea of tall buildings and offices .

Talking about the important of using renewable energy especially daylight to reduce energy in the building.

Important of using solar energy to produce energy inside office buildings.

How we can reduce the energy using through good design either interior or exterior the buildings.

Talking about thermal comfort inside office buildings and the principles of its .

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

1.Examine APA or other ethical codes and standards relevant to case scenario.
2.Analyze multicultural issues such as race, ethnicity, socioeconomic class, and gender and how these issues influence theoretical, research, and the work of psychologists.
3.Evaluate ethical reasoning models that can be employed for the resolution of case examples and the advantages and disadvantages of these models.
4.Design a solution for an ethical dilemma and multicultural issues in case examples, using the most applicable ethical decision-making model.
5.Reflect upon multicultural identity, aspects of diversity, privilege, and potential bias, and how these could be addressed so as not to impact current or future work in the field of psychology.
6.Communicate in a manner that is scholarly, professional, and consistent with expectations for members of the psychological professions, using correct APA format and style.

CASE STUDY #1

During the mid-1980s, New York City had several incidents of homeless citizens freezing to death overnight while living on the streets during the winter months. In response to this problem, Mayor Edward I. Koch initiated a policy of having police escort homeless individuals to shelters on dangerously cold nights (temperatures below 20 degrees Farenheit). However, many homeless individuals refused to go to shelters, arguing that they were dangerous places where one’s property was often stolen while one slept. Repeated attempts to reassure homeless individuals that shelters were being made safer (e.g. by the hiring of security personnel) had little effect.

Mayor Koch responded by initiating another policy: A homeless individual refusing to be transported to a shelter on such occasions would be taken into protective custody by the police and transported to a city psychiatric facility, with the rationale that exposing oneself to such imminent danger indicated that one’s reasoning ability was seriously impaired and that one needed to be protected. These individuals would be evaluated by a psychiatrist the following day and then released, voluntarily admitted, or involuntarily committed, as deemed medically appropriate.

For the mental health professionals who are being asked to assess these homeless individuals, is there a conflict between their duty as employees of the New York City health care system and their ethical obligations as professionals, delineated in their profession’s ethical code?

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]

(the founded means how company raise money)

Identify two firms founded since 1980 in two separate countries. Using course material, compare and contrast the funding sources !!!!!!(including public sources of capital if appropriate) used by these firms and discuss the way these firms used different funding sources to grow.

Your report should reflect your understanding of the topics covered in the course and your ability to critically analyse and apply appropriate strategic concepts. You should also demonstrate your research skills and ability to derive analysis from a range of quality sources. Full in-text citations, Harvard style, are required.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]